• PROFINET for high speed automation

    The SPEED7 CPU 317PN from VIPA rounds up the portfolio of high speed automation units. Besides a combined MPI/PROFIBUS DP master/slave interface on the integrated Ethernet-CP, the CPU also offers a complete PROFINET I/O controller to realize modular and decentral automation structures.

    The integrated MPI/DP interface enables the projection of max. 32 connections to PU/OP at the same time. The Ethernet CP is a real time class 1 capable PROFINET I/O controller, which is programmable with STEP7 from Siemens. The instruction set of S7-300 or S7-400 from Siemens is adjustable. Of course the PLC supports the PU/OP communication for programming, installation, diagnosis and the connection to HMI and SCADA.

    The projection of the PROFINET bus system is made completely compatible with SIMATIC S7 from Siemens. This enables the user to access directly from the S7 world to the PROFINET bus components. Beside the PROFINET I/O controller functionality there are also Ethernet and TCP/IP based communication like S7, RFC1006 and open communication available for the user.

  • PROFINET for high speed automation

    The new OPTopus PROFIBUS Optical Link from SystemeHelmholz GmbH is a full PROFIBUS repeater with an integrated FO interface. The OPTopus permits transmission rates of 9.6 kbps to 12 Mbps on the PROFIBUS with automatic detection of the baud rate. With its optical signal transmission, it offers complete electrical isolation between the PROFIBUS stations and PROFIBUS subnetworks. A further advantage of the OPTopus is its insensitivity to EMC influences.

    Because of its compact design, no additional space in the control cabinet is required for deployment because the OPTopus PROFIBUS Optical Link can be used instead of a PROFIBUS connector and is simply plugged into a station in the PROFIBUS network. Moreover, no separate power supply is required because the OPTopus uses the 5 V power supply that every PROFIBUS device provides for the terminating resistor.

  • ESA's new XM7 industrial Monitor

    ESA's new XM7 industrial Monitor family offers a complete range of industrial touch screen Monitors able to fully satisfy any automation requirement, where extreme mechanical sturdiness and configuration flexibility, along with an high quality components and strong reliability, are the primary requirements to guarantee stability and long life cycle to your application.

    • Wide choice of touch screen Monitors from 7" wide up to 19"
    • Elegant and accurate industrial design, available with aluminium or INOX stainless steelfinishings
    • True-flat touch screen frontal
    • Touch screen output ports: RS232, USB

Welcome to DC Automation Automation & Saftey Solutions

DC Automation is an Automation, Safety and Control components and distributors. We have exclusive distributorships and strategic partnerships that allow us to add real value to our customers. We can supply Siemens, Mitsubishi, Schmersal, Helemholz, Vipa, IBH Softec, ESA HMI, and Endress and Hauser.

DC Automation has vast experience in the application of all our Automation Safety, and Control equipment. We also offer complete machine safety assessments. DC Automation has experienced staff, educated extensively to Masters in Engineering level, and this, when combined with our experience in industry, will lead to superior value for our customers. We provide an engineer-led service, which facilitates the highest level of technical and customer service.

DC Automation's core competencies is working with our customers to provide solutions in the most efficient and cost-effective way.

Please contact us if you require us to asses new application, Breakdown, Support or Spares.

Phone: +353 1 4419187
24 Hour Support : +353 86 784 4861

DC Automation is a member of the Engineers of Ireland (MIEI).

ESA have released the high awaited new range of touch monitors. The perfect solution for areas where a keyboard and m…http://lnkd.in/3pnScQ .. 7 months ago